Top Dawg 2nd Gen Wireless Backup Camera System with 7 inch LCD - Up to 4 Cameras

Top Dawg 2nd Gen 7 inch Monitor with 2-4 Wireless Backup Camera System. Perfect Rear View Camera for Trucks, Truck Drivers, Semi-trucks, Buses, RV, Trailers.

• Extended Wireless: Camera offers 200Ft or more of wireless range
• Reduce backup accidents by 70% or more
• Save Money: Reduce Insurance Rates and Premiums
• Multiple Uses: Works with trucks, equipment and vehicles of any type. This cam allows you to see what is behind or in front of you during reverse or at all times! Hook up boat or trailer in seconds.
• Simple to use: Easy Installation, 10-30 Minute Install
• Heavy Duty: Weatherproof IR Camera with 120 degree ultra wide viewing
• FREE Shipping: We ship all orders out USPS Priority, 1-3 Day shipping
• 30 Day Money Back Guarantee: Not sure if this is the headset for you, CHECK it out for 30 days to make sure!
• Cameras: System INCLUDES 2 CAMERAS & CAN BE EXPANDED TO 3 or 4 CAMERAS, Excellent video resolution, IP68 Waterproof Heavy Duty CCD IR Camera with 120° Ultra Wide Viewing Angle
  
• LCD: 7” Color TFT-LCD Monitor with built-in receiver, one RCA A/V output
• Night Vision: 18 Infra-red Lights - 30-50ft of Night Vision
• Mount: Includes heavy duty windshield and dash mount

WHAT'S IN THE BOX?

This WIRELESS BACKUP CAMERA FOR TRUCKS is a HEAVY-DUTY night vision camera system.  It will show video of what is behind vehicle when vehicle is in reverse. This system has a DIGITAL WIRELESS Color Night Vision Camera that is designed to be installed practically anywhere on a vehicle, rear bumper, trailing or leading edge on vehicle or trailer and much more.

This DIGITAL WIRELESS system comes standard with TWO (2) Digital Wireless Cameras. This system can be expanded to use either 3 or 4 total cameras.  This is a MONITORING system only.  For a Multi-Camera Digital Wireless system that both MONITORS & RECORDS, see our Digital Wireless DVR system HERE.

This system is designed for large heavy duty trucks, commercial vehicles and RV’s. Power is supplied to the camera by tapping into reverse back lights or any 12V running lights (unless you purchase the optional rechargeable waterproof battery HERE.  This system can also be wired into a constant power source to be able to view cameras when VEHICLE IS NOT IN REVERSE.This system also includes a 7” LCD with heavy duty mounting bracket. System is designed to be hard wired directly into 12 volt power source. When the camera powers on, the LCD will display what is behind the vehicle. This wireless backup camera for trucks includes night vision IR lights for great visibility at night. The 7” LCD can view a single camera FULL SCREEN, 2 cameras SPLIT SCREEN & 3 or 4 Cameras in QUAD SCREEN.

NEED ACCESSORIES FOR THIS CAMERA SYSTEM?  CLICK HERE.

CCD Camera/Transmitter

• Imaging Sensor: CCD
• CCD Resolution: 420 TV Lines (PAL & NTSC)
• Minimum Illumination: 0 Lux
• Transmission Frequency: ISM Digital
• Transmission Power: 10mW/CE; 2mW/FCC
• Modulation Type: FM
• IR Night Range: 30 to 50 ft
• Bandwidth: 18 MHz
• Waterproof: IP68
• Power Supply: + 12V or 24V DC
• Consumption Current (Max.): 230mA
• Horizontal View Angle: 130 Degrees
• Unobstructed Effective Range: 100m [Min.]
• Dimensions (W x D x H): 3.75 x 2 x 2.5 inches (excluding bracket)
• Weight: 15.5 oz
• Operating Temperature: -30°F/150°F
• Operating Humidity: 85% RH

Monitor/Receiver

• LCD Resolution: 800 x 480
• Receiving Frequency: ISM Digital
• Intermediate Frequency: 480 MHz
• Demodulation Type: FM
• Antenna: 50 ohm SMA
• Receiving Sensitivity: <= -85 dBm
• Video Output Signal Level: 1 .1 V +/- 0.2V~ @75ohm, S/N>38dB
• Power Supply: + 12/36 V DC
• Consumption Current (Max.): 600mA
• Unobstructed Effective Range: 100 (Min.)
• Dimensions (W x D x H): 8.5 x 1 x 6 inches
• Weight: 14 oz (excluding bracket)
• Operating Temperature: -10°C/+50°C or+14°F/122°F
• Operating Humidity: 85% RH 

ACCESSORIES

• Magnet Mount for Camera: Magnet Mount allows for 1 minute installation & allows for easy removal and install if you change trailers often. Click HERE 
• Rechargeable Weatherproof Battery: If you do not want to connect the wireless camera to a 12v power source, you can add this 10 hour battery, which makes installation take less than 1 min. Click HERE

• #1 Sun Shield for monitor
• #2 Dash Mount Holder for LCD Monitor with screws
• #3 Digital 7” LCD Monitor with built-in Digital Receiver
• #4 TWO Digital Wireless LCD Antennas
• 2 (TWO) - Digital Wireless Heavy Duty Bracket Cameras
• Power cable for monitor installation
• Remote Control for LCD Monitor
  
• Instructional Manual

• Magnet Mount for Camera: Magnet Mount allows for 1 minute installation & allows for easy removal and install if you change trailers often. Click HERE 
• Rechargeable Weatherproof Battery: If you do not want to connect the wireless camera to a 12v power source, you can add this 10 hour battery, which makes installation take less than 1 min. Click HERE

SEE ALL ACCESSORIES FOR THIS CAMERA SYSTEM.  CLICK HERE.